Jump to content

Chrisg

Members
 View Profile  See their activity

  • Posts

    1,712

  • Joined

  • Last visited

 Content Type 

Everything posted by Chrisg

  1. Chrisg
    Isn't it also that the non thrust side is the camshaft side
  2. Chrisg
    ​welcome
  3. Chrisg
    Quote " the co rod,without its piston,just will not fall of its own weight when set in a horizontal position , but if given a fairly sharp push from that position it should make about one complete revolution round the pin". From the motor repair manual
  4. Chrisg
    Most can do it from the part description of what you need. What do you want
  5. Chrisg
    Got a 4c mine detector and the label on the box appears to be 10 AEB any help with what they mean
  6. Chrisg
    I'll be there.
  7. Chrisg
    Have a new pin turned up and welded into the old plate
  8. Chrisg
    Welcome to hmvf Ian. What part of Sussex
  9. Chrisg
    I think it would classified as a trailer and if over 750kg the brakes need to work
  10. Chrisg
    30305 is a standard metric taper roller bearing should be available at your favorite bearing stockist
  11. Chrisg
    The ferodo part number appears to be V130. 46.25 inside diameter
  12. Chrisg
    I think that they are stepped scraper rings and the step should be downwards http://www.caberpistonrings.com/eng/tecnica.php?sez=4tempi
  13. Chrisg
    Is there not top marked on the rings?
  14. Chrisg
    Too much. Need to go and lie down in a dark room
  15. Chrisg
    Found a reference to a Lucas (Atlantic ) headlight bh1145. 5 & 7/8 dia
  16. Chrisg
    :tup::
  17. Chrisg
    Damm jack wasn't supposed to know
  18. Chrisg
    You could try autopaints plus in Lewes.
  19. Chrisg
    Excellent show. Very relaxing
  20. Chrisg
    Welcome to the forum 73 de. G1GDJ
  21. Chrisg
    I'll be there
  22. Chrisg
    Welcome back mate. It was good to see you at w&p.
  23. Chrisg
    Welcome Steve
  24. Chrisg
    Welcome & happy birthday
  25. Chrisg
    Have a look at the page on grease nipples if yours looks like the second picture then on the connector page it should be either item 6 or 7
×
×
  • Create New...