Jump to content

toby burnham

Members
  • Posts

    23
  • Joined

  • Last visited

Reputation

10 Good

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Evening all, Sorry clive it was the wrong reg number should be 31BK58.Have you got any history or date in and out of service.Just got the front window lift cylinders and hydraulic hoses repaired.Windows open and close now,just got to replace the 3/16th pipes that go to the floor pumps it looks like they were originally cliped to the bulk head then run across the floor to the pumps.is this clutch linkage on the outside of the gear box.Clutch pedal does go up and down ok. Toby
  2. Looked to day on karki imports website and they have pictures of a crossland oil filter to fit all B series engines,any body know the part number as they are avaliable here.I also need a wireing diagram as a few items are not working.I have just finished a landrover 110 desert patrol vehicle and its time to start looking at the pig.It Military Reg is 13BK37 and its a MK 2 uparmoured .it was ok when parked up but now the gears will not select any suggestions. Toby
  3. Just started making a start on my humber pig restoration.On talking to a mate of mine he asked me if humber pigs were ever deployed on the streets of the main land during the troubles.I am sure i have seen a picture of one patroling around the streets of london, trafalger square i think.Has any one got this picture. Toby.
  4. Army puplication 2320-D-127-201 states that that the alternator should be a Lucas A115/45 Fitted with intereral regulator.It has a nominal outputof 12v 45A.This publication is dated Oct 92 when they served in Northern Ireland.They may have been changed when they were refitted for Iraq. Toby.
  5. Hi Paul, Its the dash and Engine bay wiring i am after.Some of it must be the same as a civvy V8.Have you had problems with your front screens.mine have misted up!!!.If i cannot get replacements i might have to get new ones cut,any ideas. Toby
  6. Can anybody copy me a wiring diagram for a land rover 110 defender v8 snatch.The additional wiring is not the problem so a normal military v8 diagram would be fine. Toby
  7. The info from my dad's maintenance manual is: LT85 Santana Gearbox LT230T Transfer box Toby
  8. Hi all, I finished restoring a Series 111 12v VPK last year.The suspension was fitted with aleron bump stops all round.when restoring the chassis i noticed that there was extra reinforcing plate welded to the rear cross member for the weight of the fiberglass armoure.The fibre glass panels were bolted on by two fitters with basic hand tools.The material makralon is like a very thick perspect sheeting that was used for the roof hatch surround.The body work panels are made from multiple layers of heavy duty fibreglass. My landy left the factory in late 1984 as a 12 volt GS.It was converted into a vpk in 1986,then up graded in to a HVVPK With steel armoure and a single piece rear door.Some time between 1989 and 1993 it was down armoured to a VPK and refitted with twin rear doors.Most VPK bodies were transfered from vehicle to vehicle as they were sold off.Mine only servived because it was to be scrapped and left on the vehicle and sold to a dealer.Ihave been told that Mark cooks was the only 1/2 one left and that went to Ireland.I have a copy of the fitting instruction up the loft some were,i will have a look.A few pictures of the before and after.It was featured in Land rover owner international December 2010 Toby
  9. I remember it being on the TV it was on when channel four had just started.I asked my dad about it and as if by magic he had recorded it on video.I had a friend at work transfer it to DVD Its about an hour long and it basicaly tells the story of jeff hawke bringing five not very airworthy B25 From all corners of the USA to England for filming.On the way they had problems with old raylon tyres giving out,engines that wont start,wings iceing up,and original WW11 radios packing up.Hawkes Aircraft only had short range tanks fitted so he strapped a pair of 45 gallon drums and a hand pump to pallets and loaded them into the bomb bay.A amazing jounery and a amazing man. Toby
  10. Thinking of putting my Ser111 VPK/HVPK land rover up for sale to fund the Humber pig restoration.Does any body Know Of A military Vehicle Restorer/Servicer in the northampton area. Toby
  11. Hi Clive, I think that i should be able to rebush them at work.I will pick them up from you on sunday Toby
  12. Tried the gears today when i moved it all seams to engage ok.first gear selected 4wd ok .What position is the 4wd lever in when you are traveling in rear wheel drive.Started ok but the engine cuts out and will not restart.Problem with the fuel pump petrol getting by the diaphram and thining the oil down.Also fuel tanks dirty.Plan of action: 1.Remove fuel pump and repair 2.replace engine oil and filter. 3.clean out pipe from filter to carb 4.Remove fuel filter and clean out 5.Refit filter and connect pipe from filter to carb.Reit a spare bango to filter inlet and run a pipe from a jerry can to get the engine running. Is there a fuel switch over tap fitted or does the fuel pull from both tanks Are there fuel senders in both tanks. Will add some pictures latter this week Toby
  13. Going to pick the pig up tomorrow on the back of a foden drops truck.I am not going to run the engine until i have to move it onto the drops pallet.The fuel pump has got a faulty diaphram and is filling the sump with petrol.My gear stick is missing the gear knob.what i need to know is the gear positions.I understand that first gear selects 4wd.does it disconect when put into second gear.Does the other lever on the floor selects 4wd And what position does it have to be in for normal travel. Does anybody do a fuel pump rebiuld kit or can it be repaired.I read some were that a land rover diaphram can be modified Regards Toby
  14. As promised a few pictures of the restored Ex-Northern Ireland VPK land rover
×
×
  • Create New...