Hello Ken,
I haven't used it yet as I had a bent valve in it.
Took me a while to get the parts needed as I didn't have any spare parts.
Would be interested in a spare brush and fuse though.
Cheers,
Danny
I have got one off those genny's as well.
I got new valves and valve guides from a seller from the US
Also a new head gasket through e-bay. As well as a complet gasket set for the engine.
If you need the address for the valves let me know and I will look it up.
Recently there was a head gasket for sale on e-bay UK that didn't sell.
I believe it's relisted under number 220596657921 get it while it's there !
A reprint off the manuals can be bought at Rob van Meel who reprints manuals.
http://www.robvanmeel.nl/
His stock numbers are 0993 and 0737
Have you seen the following link already ?
http://www.pbase.com/kees_s/hobart
With regards,
Danny
For some very nice interiour shots from a open workshop displayed in Overloon look at the pictures off Kees of his Picture site.
http://www.pbase.com/kees_s/image/83674564
http://www.pbase.com/kees_s/image/83674566
http://www.pbase.com/kees_s/image/83674567
http://www.pbase.com/kees_s/image/83674568
http://www.pbase.com/kees_s/image/83674569
http://www.pbase.com/kees_s/image/83674570
http://www.pbase.com/kees_s/image/83674573
http://www.pbase.com/kees_s/image/83674575
http://www.pbase.com/kees_s/image/83674576
http://www.pbase.com/kees_s/image/83674578
or to view them all see
http://www.pbase.com/kees_s/overloon&page=all
Cheers,
Danny