Jump to content

Foxtrott363

Members
  • Posts

    49
  • Joined

  • Last visited

Everything posted by Foxtrott363

  1. Does anyone has a circuit diagram for Penthouse lamps? I have some Westair 12 and 24v penthouse lamps to repair, but got some values, especially of the step-up transformers, missing. Are there any EMERs or AESPs for Penthouse lamps?
  2. I can send you a manual, send me a PM if its still required.
  3. I have nearly all the documents and handbooks, but a part number or a picture of this lamp is nowhere to find. Only mentioned that the vehicle has a lamp, but without futher details. Thanks for the link. That one could fit.
  4. The size and position of the mount seem to fit, but it has to have a switch on the lamp, the supply cable has permanent 24v.
  5. I am looking for information about the Map Lamp that was mounted in Signals 101 above the windscreen. I've never seen a picture of one. The Power Supply is from the 24v Power Interface Box on the radio rack, from where the cables are layed throught the body to the windscreen. To the right is a clamp attached, so it seems that it was some kind of gooseneck map lamp. Anyone here with information or pictures of it?
  6. Does anyone know something about the roof antenna mounts from the Land Rover 1t Signals for Radio Rebroadcast? As far as I know: A, B, C, D were for Clansman VHF Radios (353, 353Z) E was for Clansman HF Radio (321) But my Rover has a sixth antenna mount on the roof (marked with orange '?') and I have no idea for which purpose. Maybe someone can help. The Mountings inside can only hold 5 Radios in the lower rack and 2 DMUs with IBRU in the upper.
  7. I sell two sets of Larkspur Rebroadcast Units. Please send me a PM for more informations or pictures. Set 1: Rebroadcast Box - new, but package opened Relay Unit - new, but package opened Larkspur Headset - new, but package opened Associated Cables, blue connectors - new, but package opened Price: 120 pounds ono Set 2: Complete unopened wooden Box, with all ancilliaries for this Rebro Set, Pouches, D10 cables , Rebro boxes, Headset, etc. Last time opened 1981, by the Army, to renew the desiccant! NOS! Picture is an example picture of another box. The offered box is unopened! Price: no ideas to be honest, open for offers
  8. it has only 4 pins, but all parallel. Not angled, like in the picture below. I'll take a picture tomorrow.
  9. figured out that the 3 connectors are for Clansman Secure Remote System and the top right is a Quad cable connector, most possibly for a Ptarmigan Subset
  10. Does anyone also know, where the top 4 connectors are for? Looking like Larkspur, but the top right looks unusual.
  11. Hello everyone, I am looking for information about the Clansman Rebroadcast Installation in a Land Rover 1T Signals. And also for documents, specially for this Signals Body type. I have a bulk of general handbooks for the normal Land Rover 1T, but the Signals Body was build by Marshall and equipped by Hunting Eng. Ltd and I can not find any documents about it.
  12. Does someone here know a source for a Clansman IBRU (Interconnecting Box Radio-rebroadcast Unit)?
  13. Typical problem. I had non without these problems. As far as I know, there are no specific spare parts available for these cords, but it should work with clansman cables soldered to it aswell.
  14. https://www.ebay.de/itm/284642344544 More Larkspur Parts available for sale, especially Harness Boxes. More information via PM. Located in Germany
  15. Looking for a RB44 canvas softtop.
  16. For sale is a Racal MA-4224 Radio Crypto Unit. It is a voice scrambler to be connected to combat net radios with a 7pin cable. I sell it as "untested", but I connected a modified cable, pins according to the MA4224 manual, to a VRC353 and it powered up and the LED lid. Audio was also available. For sale ist just the unit, I have no correct cable for the unit. 300 GBP ono + shipping from Germany More info: https://www.cryptomuseum.com/crypto/racal/ma4224/index.htm
  17. The most common fault with the ANR headsets is that the internal ANR module, which contains the loudspeakers, is faulty. I also had various green PTTs that were not able to power the ANR headsets. You can check between Pin C and E on the Audio socket of the Crewbox, if 18-28v is available.
  18. These multiset installations does not seem to combine the CNR with SCRA, the seem to be "stand-alone". The use of an CNRI was, as far as I know, very rare.
  19. Yes, exactly. It is the Terminal equipment and I got it nearly complete. I just saw your post with this overview picture: So these seem to be the codes for a multi-set installation, combined with Clansman. Does anyone have a source for one of the mentioned numbers 63646 to 63677?
  20. I am looking for Army Manuals/ AESPs about the installation of an SCRA(T) into a Land Rover 110 (Truck Utility Medium). I am sure they exist, but I couldn't even figure out the correct number of the manual. Does anyone has some information or even the specific manual? I already have the Land Component Handbooks for SCRA and the Ptarmigan System Overview, where they are mentioned.
×
×
  • Create New...