Ausprey
-
Posts
71 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Blogs
Events
Articles
Store
Downloads
Everything posted by Ausprey
-
Does any one have a spear driver seat SLIDERS for sale pls thank you
-
No Mike they are New cups the original edges has rust in them you no how our cs8 was the cups took the most time to make .
-
Some more things done two petrol tanks ready for cs8m
-
THANK you John and from you too
-
Some more things done two petrol tanks ready for cs8m
-
NEED HELP does any one have or has a CS8 COMPRESSOR as i need some information off haw it is fitted to the chasis any photoes or setch is helpfull thank you as always for your help MARIO
-
I would like to wish you all ,and your family's a happy New year and thank you for all the help you share Mario
-
THANK you Mark it is very interesting but it is too much heavy. Best regards for New year
-
Hello Mike i have send you an e mail that i receved them thank you mike for all the time you spear me. mike about the euro sreens as far as i no the early were brass but they changed to steel mine were still attached to the bulk head i will attaced few photos , if you need any measurment i can send Mike.
-
here is some photoes off cntinuation of my restoration bonnet is nearly finished ero screens finished batrey box finished passenger foot bay finished head lamp brakets finished i would like to thank every one of you for your help and for your support.
-
thank you very much that is exetly what i need that is why i ask , and i would like to thank every one for your support
-
Hello all sorry for not write for a long time but i had some health problems , i want to wish you all and your familys happy christhmas and a happy new year full off strenght ,happyness and piece i have started again in the restoration ,does any one have a fuelcock that is in the dash board and a spedogear that is fitted on the gear box for cs8 for sale pls best regards mario malta
-
Thanks Mike sorry if I am asking all the time but Without help I could not continue the restoration Thx for every thing Mario
-
Hi All I need some help please Can any one send me the measurement For the battery box of the cs8 compresser Under the floor board on driver side thank You for your help. Mario
-
Thank you Tom when it is ok with you Best regards Mario
-
Hello Tom if you have any photos of the sides can you Send me to see if I am correct what I am doing.thx Best regards mario
-
If you need photos of the seats of chevrolet cmp I can Take for you . Mario malta
-
Hello Tom is it possible to send me those photos please Sorry for trabiling you thanks Mario
-
This week I nearly have the driver side Complete put some photos later this week I received some more parts for cs8. I would like to say thanks to those who sold the Parts.
-
Hi Mike I have already tried to get them out but all snapped Except 2 even I heated them with the Berner still they Snapped the for the advice. Mike do you any one that have a cs8 compressed I need the donations for the battery box Under the driver side Nicolas Sawyer send me some good photos I wold like to say big thanks, but I need some measurements pls any one have is appriciatod.
-
Hi Mike the narrow part off the kingpin is 23.1 mm The thick side is 29 mm On the box there is cv 11/40 Mike John walker had king pins sett for sale for the cs8 If you need his address I have he is a very helpful guy
-
Mike I think all the British ww2 veichel where like that As Bedford , Austin the front wider then the rear maybe For stability the Mike
-
Mike I wish I lived near I can give you a hand , if it will be comfortable for you I need the measurement for the long tool box after the passinger foot well out of the petrol tank When you are comfortable the.
-
Hello Mike I did not know about that panel when you Can some measurements pls thanks always
-
restoration Bedford MWD restoration
Ausprey replied to rampant rivet's topic in Blogs of MV restorations
Nice work Jeremy you can do another for me while you Are on the heat the second is easier they say ha ha Looking forword to photo finish keep it up
