Jump to content

Surveyor

Members
 View Profile  See their activity

  • Posts

    1,735

  • Joined

  • Last visited

  • Days Won

    4

 Content Type 

Everything posted by Surveyor

  1. Surveyor
    Richard The ones I can find so far start in 1992, mines before this, will send and FOI as well Richard
  2. Surveyor
    Richard The trouble is when thinking of these things you never think of the obvious Many thanks Richard
  3. Surveyor
    Does any one have any details of this contract, I believe it was for vehicles thanks Richard
  4. Surveyor
    I suppose a supplementary question is where do we find what was built on the contract reference? This is for those like me learning
  5. Surveyor
    Curiousity, I have a No. 2, No.3 and a No.12 stove I have seen a picture of a No.5 stove. My question is how many types using the designation"Number" and what do they look like. I believe one may be a Sankey trailer Thanks in anticipation Richard
  6. Surveyor
    Do they think the shafts are rigged to prevent entry that's why digging else where
  7. Surveyor
    Thanks for the tip, just need to find what size for the tent, don't have the enthusiasm to unpack and look at the moment
  8. Surveyor
    Somebody said they use one as a car port
  9. Surveyor
  10. Surveyor
    Just bought the thing, need to check contents but been told pegs to hold "skirt" in place not included, can remember to erect roof and poles to mid way first before pulling canvas over then fit lower poles. Now the questions 1. Any one have a manual to check parts and erection 2. A guide to repair the canvas 3. Size of pegs for "Skirt" have been supplied the strap and pegs for the storm event 4. Any other advice apart from "WHY" Thanks Richard
  11. Surveyor
    Thanks for the answers, I read about the paint in the LRO Magazine and thought would ask
  12. Surveyor
    Yes thanks for the reminder, will see if I can get some from scrap to try first
  13. Surveyor
    Told you me being thick
  14. Surveyor
    Sorry me being thick no doubt, I assume that goes out to the rear of the vehicle,?
  15. Surveyor
    Thanks, but where is the winch?
  16. Surveyor
    For those of a grey funnel background any chance of some general external pictures to try and place things in context? It does look in good condition
  17. Surveyor
    Reading the response I need to do some more research before attempting anything. I am looking at small scale maybe 1m at a time. And occasionally, so wonder on shelf life of these products
  18. Surveyor
    Thanks, not far from Edinburgh
  19. Surveyor
    Many thanks, just trying to get my head around this as never done before but considering it for repairs tec Richard
  20. Surveyor
    I have read a lot both here and elsewhere regarding Etching Paint. If I have read correctly its to be used on bare metal, not metal already painted, is this correct? Assuming Correct I assume I need to clean all paint, not clean rust areas then etch? Can any one advise a good supplier for the novice Thanks Richard
  21. Surveyor
    Does any one have a copy of the form used to record the vehicles mileage etc. for the 1980,'s I have a VUR for the |Navy but not one for the Army or RAF. Just would like a set for the Land Rover Thanks Richard
  22. Surveyor
    I have bought this now, thanks
  23. Surveyor
    Thanks, how do other people find and I can't is one of those things
  24. Surveyor
    I have found that I may need to replace the sheet metal axe bracket, last resort a blacksmith. I have contacted both John Craddock and Dunsfield and they do not have any, the code for the earlier one and this appears to be the same. I have the bolt and a source for the spacer Can anyone help Richard
  25. Surveyor
    Noticed Withams were closed at weekends now
×
×
  • Create New...