1989 Land Rover Defender GS

Hi

Can I ask for some help?

I have a Land Rover 110 1989 GS which has salisbury axles all round.

I need to get the part number for the front disc calipers, but I cannot make much sense of the civilian codes.

Is there a 110 GS military parts catalogue, or could anybody advise the right part number..

Oh, it's solid discs and drums on the rear

Thanks

Paul

There is a MOD type "Supplementary" for all the changes / bolt-ons - with this you cross-ref. on the Matrix chart against the Contract No.

I would say - you need to consult the 'Civilian' Defender Parts Book , for this you need to work to the 'CHANGE POINTS' against the VIN No. - you may not find this so easy and need to consult a Franchise Parts Counter , they can do a double check also on computer..

Hi Ruxy

I did try that route, but I cannot find much about the contact number or a reference point, as the Civilian models don't cover salisbur axles. I am guessing as it is an early model it should be RTC5572 & RTC5573

But, knowing my luck I will end up ordering loads of the wrong parts, which I like to avoid if I can

The 90" were Rover drum or disc rear axles , was the 110" (rear) from early days not always Salisbury ?

AS far as I am aware they were always salisbury, with disc front and drum rear on the 110