Taz5311 Posted June 26, 2017 Share Posted June 26, 2017 Hi, im new to the forum as I'm currently building a collection of 1/35 scale models of the vehicles I used during my time in the Artillery. does anyone have a clansman 'pineapple' that would be able to send me the measurements of the pineapple so I can scratch build one please. many thanks stef Quote Link to comment Share on other sites More sharing options...
Surveyor Posted June 26, 2017 Share Posted June 26, 2017 Can't get to mine for a while if you are willing to wait, Richard Quote Link to comment Share on other sites More sharing options...
g0ozs Posted July 4, 2017 Share Posted July 4, 2017 Hi I dug one out of storage this evening - it is approximately 5.5 inches wide and 6 inches high with the antenna base projecting about 2 inches above the body. The round bar at the bottom is inside the mast so does not add to the hight. The antenna element is in 3 sections of approximately 3 feet length each so a total of 9 feet - the bottom section is about an inch diameter - the top two are normal Clansman antenna rods. Photos attached below Regards Iain Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.