Jump to content
  • 0

109 land rover brake master connector size


ianmaiden

Question

Hi can someone please help buy telling me the sizes of the brake connectors from the brake master cylinder as they are both different with the one at the end when attached being larger a part number or link would be much appreciated (for the larger one).

Thanks in advance

 

 

attachment.php?attachmentid=126677&stc=1

brake master cylinder.jpg

Link to comment
Share on other sites

2 answers to this question

Recommended Posts

  • 0

I assume you are talking Ex-MOD S3 with dual line brakes ?

 

If so - after mid 1980 there was a change of master cylinder NRC6096 & metric threads - front is 12mm x 1mm pitch , rear (adj. vacuum servo is 10mm x 1mm pitch.

 

However , just looking at threads - they seen early MC 90577520 , these are UNF - IIRC 3/8 in x 24. 7/16 x 20.

 

Suggest you double check against tap(s) or UNF bolts ,,

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...