64EK26 Posted May 30, 2017 Share Posted May 30, 2017 Hi This floor pan came with my MWC The slot on the left is for the handbrake, what is the other big hole for (A Scammel Conversion ?) Cheers Richard Quote Link to comment Share on other sites More sharing options...
wally dugan Posted May 30, 2017 Share Posted May 30, 2017 Access for topping up the brake master cylinder Quote Link to comment Share on other sites More sharing options...
64EK26 Posted May 30, 2017 Author Share Posted May 30, 2017 Hi The Master Brake Cylinder is on the far right hand side, so it won't be an easy access Cheers Richard Quote Link to comment Share on other sites More sharing options...
landrover nick Posted May 30, 2017 Share Posted May 30, 2017 my brake master cylinder is in the middle of the access hole giving fairly easy access to top up the master cylinder this photo was taken during the strip down of my truck hope this helps Nicky Quote Link to comment Share on other sites More sharing options...
64EK26 Posted May 31, 2017 Author Share Posted May 31, 2017 Thanks All That makes sense.. Forgot that there was a supporting bracket on the Offside chassis rail :blush: I take it that there is a cover plate that just drops into the hole, is this clipped in ? Also now know where the 'wedge' shapes plate goes (Attached to the longitudinal handbrake support) as this came in a box of bits. Cheers Richard Quote Link to comment Share on other sites More sharing options...
Danny P Posted May 31, 2017 Share Posted May 31, 2017 Hi Richard, Yes they are clipped in. Cover plates of cab floor at the right of the picture! Cheers, Danny Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.