Jump to content

French PRC-10 power supply question


Bilbo42

Recommended Posts

Hello all. I've been away quite a while but am back and seeking info. Several years ago, I found a French STTA ER-79A dated 11/76 and the STTA DY-27-B power supply that goes with it. I have just now been able to have time to see if I can get it up and running. As I understand it, the ER-79A is the French equivalent to our Prc-10 except with slightly different frequencies. I have read on the net that the DY-27-B will power it using 8 D cells wired in series for 12 volts. When I got it, it came wired with the male plug like what would go in the cigarette lighter female hole in the old days. I guess a better way to say it is it is set up I think to use a 12 car battery receptacle. Also it came with two of the black plastic battery boxes (each set up for 4 D cells) so the DY-27-B could use D cells instead of the car battery plug. I guess these are two separate ways the DY-27 could be powered. My question to you folks that know a lot more than me about this stuff, is would it hurt to use the 12 volt car battery setup because that has higher amperage than the 8 D cells? Not sure if I said that right but I don't want to blow up my radio. Just because the DY-27 came setup for a car battery doesn't necessarily mean the guy ever really tried it or maybe he did and it blew the radio. It would be more convenient for me to use a car battery but don't want to hurt the radio.The car wiring setup from the previous owner does have an inline fuse of 5A 32 V which sounds way to high. Any thoughts from y'all would be most welcome!!! Mr. Administrator, if you feel I would be better served by reposting this in American radios since it relates to the PRC-10, please feel free. Thank you.

Link to comment
Share on other sites

Bilbo

I see you say our prc10 so guess you are in the USA,i have a British a41 which is almost identical and have used a French psu for a prc19 to power it although it was removed from the case with the protruding pins and runs nicely from 2 1.2Ah sla batteries all fitted into the old battery case(the waxy one)which then slots into the metal case,i did not change any wiring and the plug fitted so maybe i was lucky and did not have a smoke leak but check with somebody knowledgeable than myself and if you can avoid it do not butcher the case!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...