Jump to content

morris commercial cs8


Ausprey

Recommended Posts

  • Replies 121
  • Created
  • Last Reply

Top Posters In This Topic

Hi all does any one no from where I can buy engine

Block liners also I need front spring hanger and brackets

That are bolted to shasis at the rear of the front springs

And the centre bold plates and I holds

Even with wear and tear as I do not have them even to copy thanks for your help mario

Link to comment
Share on other sites

lots of cs8 parts here but i need them myself

hi any luck for a self starter and an acilirater pedal,front springs brackets and shackels

front spring u bolds and center bolt plates even if they are with wear and thear at least

i will have a patern to do them thx

Link to comment
Share on other sites

I would like to help you but . It is a major undertaking, freighting heavy parts to Malta ????

 

I've sent two N0. 11 wireless sets to the UK, I had to make the wooden boxes, take them to a freight forward agency in Melbourne, I slept in the back of my car overnight in a car park . The paperwork, the time. I sent a No. 11 cab windscreen to the UK . I live 130 KM from any freight depot . Getting the picture ? I m not young anymore .. traffic in Melbourne is a total nightmare .

 

Would you do all of that for me if I wanted some CS8 parts from you ?

 

Sure I could put the parts in abox, but you would have to arrange a courier to pick it up..big money needed

Link to comment
Share on other sites

Years ago I used to post conrods all over the world.

 

I'd wrap them in bubble wrap then in cardboard, wrap with packing tape and take them to my local Post Office (every Australian town has one) and let them do the delivery.

 

A starter wouldn't weigh more than their limits allow.

 

Make the purchaser pay postage and you've done a fellow MV enthusiast a great favour.

 

If I lived in near you I would collect the starter and post it off on your behalf.

Link to comment
Share on other sites

Australia Post is not that reliable, I was sent two wheels from NSW to UK, in separate parcels, one arrived and the other disappeared, not only that but the original tracking labels had been changed to different ones and there was no way of locating the missing one. I use couriers like FedEx or TNT now when sending overseas.

Link to comment
Share on other sites

That's interesting Richard as I've used Aussie Post to ship stuff and run a business for 30 years and very very rarely have they lost anything.

 

I've sent and received literally hundreds of packages and tens of thousands of letters to and from our business.

 

Do you know if your wheels were misplaced in Australia or somewhere between us and you?

Link to comment
Share on other sites

Do you know if your wheels were misplaced in Australia or somewhere between us and you?

 

We know from the other identical package that it left Sydney on a QF1 flight to Heathrow and the Australia Post tracking labels were removed and substituted for another type. This made it impossible for the sender to track either of them.

Link to comment
Share on other sites

we know from the other identical package that it left sydney on a qf1 flight to heathrow and the australia post tracking labels were removed and substituted for another type. This made it impossible for the sender to track either of them.

 

 

 

 

 

hi all last week i continued some work on the morris,dismantell the petrol tanks and trays

they need to be new the straps are ready and radiator strips support ready ,not so much time

after work.20161126_115015.jpg

20161203_121400.jpg

20161203_121509.jpg

Link to comment
Share on other sites

Some more work during the week end till i find some parts and diagramms and measurments for the body to re manufacture i decided to start putting back togeter the transfer case , and gearbox ,

bought some new bearings and oil seals and made new gaskets , i welded by cast iron a piece off the transfer case that was broken ,does any one have any photes or diagramm of the mountings fromm the

tranfer case to the middle cross tube as it has the reduction for the compresser any help is appriciatod.

20161001_130156.jpg

20161001_130150.jpg

20161001_130208.jpg

20161201_171327.jpg

20161201_171305.jpg

20161203_121202.jpg

20161201_183619.jpg

20161203_121156.jpg

20161203_121214.jpg

20161204_121127.jpg

Link to comment
Share on other sites

some more parts are sand blasted ,etc prime and under coat . petrol tank brackets are ready to

be blasted and sprayed engine liners found from malta , today i went to gozo to take some more

measurments in engine bay breackts . hope to do some more work in christhmas holidays and

waiting for some parts we bought ,i would like to say thank you from my heart for those who

sold me some parts and more to others that send them even free.

20161203_121600.jpg

20161208_193921.jpg

20161208_193703.jpg

20161208_193900.jpg

20161208_193908.jpg

Link to comment
Share on other sites

does any one have 2 mails and 2 females for sale that are in the end off the stays that are from the bulk head

to angle iron in engine bay over engine i am posting some photos off them they are used also in hand brake stays

any help will be appriciatod thank you ass always .

20161211_161736.jpg

20161211_161807.jpg

20161211_170000.jpg

Link to comment
Share on other sites

does any one have 2 mails and 2 females for sale that are in the end off the stays that are from the bulk head

to angle iron in engine bay over engine i am posting some photos off them they are used also in hand brake stays

any help will be appriciatod thank you ass always .

 

 

these are 2 photos to show what i need thank you

20161211_105112.jpg

20161211_105120.jpg

20161211_161736.jpg

Link to comment
Share on other sites

This week i went to gozo to take some measurments and some templits to reproduce for my cs8

that are missing ,i would like to thank alan for letting me measure bits that i do not have ,

many brackets in engine bay and driver side ,and i would like to say big thanks to aii of those

help full people who helped me with parts and knolidge and measurments with out you i could

not continue the restoration .

20161218_161024.jpg

20161218_161053.jpg

20161218_161109.jpg

20161218_161122.jpg

20161218_161157.jpg

20161218_161206.jpg

20161218_161248.jpg

Link to comment
Share on other sites

After sorting all the templets and measurments i started to do some brackets and missing parts.

Next week i will receve some parts for the cs8 and continue reproducing. Any comments goodor bad are welcome

i can learn from you and i will be pleased thank you all for your knoledge

20161217_193541.jpg

20161217_193553.jpg

20161217_193644.jpg

20161217_193807.jpg

20161217_193834.jpg

20161217_193935.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...