Ausprey Posted January 28, 2017 Author Share Posted January 28, 2017 Hi All I need some help please Can any one send me the measurement For the battery box of the cs8 compresser Under the floor board on driver side thank You for your help. Mario Quote Link to comment Share on other sites More sharing options...
goanna Posted January 29, 2017 Share Posted January 29, 2017 Mario The manual I was looking for, I cannot find it. I scanned it onto a CD , but I have looked and looked . The manual is the 1940 manual that MCC put together for all the military models . The book includes stuff like suspension spring dimensions Quote Link to comment Share on other sites More sharing options...
Ausprey Posted January 29, 2017 Author Share Posted January 29, 2017 Mario The manual I was looking for, I cannot find it. I scanned it onto a CD , but I have looked and looked . The manual is the 1940 manual that MCC put together for all the military models . The book includes stuff like suspension spring dimensions Thanks Mike sorry if I am asking all the time but Without help I could not continue the restoration Thx for every thing Mario Quote Link to comment Share on other sites More sharing options...
Ausprey Posted December 25, 2017 Author Share Posted December 25, 2017 Hello all sorry for not write for a long time but i had some health problems , i want to wish you all and your familys happy christhmas and a happy new year full off strenght ,happyness and piece i have started again in the restoration ,does any one have a fuelcock that is in the dash board and a spedogear that is fitted on the gear box for cs8 for sale pls best regards mario malta Quote Link to comment Share on other sites More sharing options...
john1950 Posted December 26, 2017 Share Posted December 26, 2017 Hello Mario. I wondered where you had gone. I hope your health problem is resolved, look after yourself. All the best for Christmas and the New Year to you and your family. Looking forward to some more posts on the Morris. Quote Link to comment Share on other sites More sharing options...
MatchFuzee Posted December 26, 2017 Share Posted December 26, 2017 Mario, Is this the tap that you need? https://www.vintagecarparts.co.uk/products/337-2-way-changeover-tap-3bsp Quote Link to comment Share on other sites More sharing options...
Ausprey Posted December 27, 2017 Author Share Posted December 27, 2017 On 12/26/2017 at 6:07 PM, MatchFuzee said: Mario, Is this the tap that you need? https://www.vintagecarparts.co.uk/products/337-2-way-changeover-tap-3bsp thank you very much that is exetly what i need that is why i ask , and i would like to thank every one for your support Quote Link to comment Share on other sites More sharing options...
Ausprey Posted December 27, 2017 Author Share Posted December 27, 2017 here is some photoes off cntinuation of my restoration bonnet is nearly finished ero screens finished batrey box finished passenger foot bay finished head lamp brakets finished i would like to thank every one of you for your help and for your support. Quote Link to comment Share on other sites More sharing options...
goanna Posted December 28, 2017 Share Posted December 28, 2017 (edited) Mario Did you receive the last lot of photos I emailed you ? Pics of the bonnet. Can you email me some pics of the aero screen channel. I think the originals were brass but I really don't know for sure. Edited December 28, 2017 by goanna Quote Link to comment Share on other sites More sharing options...
Ausprey Posted December 28, 2017 Author Share Posted December 28, 2017 13 hours ago, goanna said: Mario Did you receive the last lot of photos I emailed you ? Pics of the bonnet. Can you email me some pics of the aero screen channel. I think the originals were brass but I really don't know for sure. Hello Mike i have send you an e mail that i receved them thank you mike for all the time you spear me. mike about the euro sreens as far as i no the early were brass but they changed to steel mine were still attached to the bulk head i will attaced few photos , if you need any measurment i can send Mike. Quote Link to comment Share on other sites More sharing options...
markyakyak Posted December 28, 2017 Share Posted December 28, 2017 http://www.canadianalliedforces.com/for-sale/ Mario have a look at this. Quote Link to comment Share on other sites More sharing options...
Ausprey Posted December 29, 2017 Author Share Posted December 29, 2017 9 hours ago, markyakyak said: http://www.canadianalliedforces.com/for-sale/ Mario have a look at this. THANK you Mark it is very interesting but it is too much heavy. Best regards for New year Quote Link to comment Share on other sites More sharing options...
Ausprey Posted December 30, 2017 Author Share Posted December 30, 2017 On 29/12/2017 at 8:49 AM, Ausprey said: THANK you Mark it is very interesting but it is too much heavy. Best regards for New year I would like to wish you all ,and your family's a happy New year and thank you for all the help you share Mario Quote Link to comment Share on other sites More sharing options...
Ausprey Posted January 1, 2018 Author Share Posted January 1, 2018 On 12/30/2017 at 9:06 PM, Ausprey said: I would like to wish you all ,and your family's a happy New year and thank you for all the help you share Mario NEED HELP does any one have or has a CS8 COMPRESSOR as i need some information off haw it is fitted to the chasis any photoes or setch is helpfull thank you as always for your help MARIO Quote Link to comment Share on other sites More sharing options...
Ausprey Posted January 29, 2018 Author Share Posted January 29, 2018 On 01/01/2018 at 5:28 PM, Ausprey said: NEED HELP does any one have or has a CS8 COMPRESSOR as i need some information off haw it is fitted to the chasis any photoes or setch is helpfull thank you as always for your help MARIO Some more things done two petrol tanks ready for cs8m Quote Link to comment Share on other sites More sharing options...
john1950 Posted January 29, 2018 Share Posted January 29, 2018 Best wishes to you and your family, good to hear from you. Quote Link to comment Share on other sites More sharing options...
Ausprey Posted January 30, 2018 Author Share Posted January 30, 2018 10 hours ago, john1950 said: Best wishes to you and your family, good to hear from you. THANK you John and from you too Quote Link to comment Share on other sites More sharing options...
goanna Posted January 30, 2018 Share Posted January 30, 2018 Those tanks look nice Mario. Did you recycle the original end caps and the filler neck ? Quote Link to comment Share on other sites More sharing options...
Ausprey Posted January 30, 2018 Author Share Posted January 30, 2018 1 hour ago, goanna said: Those tanks look nice Mario. Did you recycle the original end caps and the filler neck ? On 01/01/2018 at 5:28 PM, Ausprey said: NEED HELP does any one have or has a CS8 COMPRESSOR as i need some information off haw it is fitted to the chasis any photoes or setch is helpfull thank you as always for your help MARIO Some more things done two petrol tanks ready for cs8m Quote Link to comment Share on other sites More sharing options...
Ausprey Posted January 30, 2018 Author Share Posted January 30, 2018 No Mike they are New cups the original edges has rust in them you no how our cs8 was the cups took the most time to make . Quote Link to comment Share on other sites More sharing options...
Ausprey Posted February 1, 2018 Author Share Posted February 1, 2018 On 30/01/2018 at 2:01 PM, Ausprey said: No Mike they are New cups the original edges has rust in them you no how our cs8 was the cups took the most time to make . Does any one have a spear driver seat SLIDERS for sale pls thank you Quote Link to comment Share on other sites More sharing options...
rampant rivet Posted February 1, 2018 Share Posted February 1, 2018 Hi Mario thank Chris for letting me have the aero screens ! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.