julezee001 Posted August 6, 2014 Share Posted August 6, 2014 Just wondered whether anyone can help? I'm working on a Supacat with an EPV auto box fitted. It has a short filler tube, but no dipstick or level bung. I've had issues re-filling it after a full rebuild (a blanking plug missing...lots of ATF in hull. Grrrr.....). If someone has a similar unit I'd really like to know how far up the filler the oil comes when ticking over in neutral? Thanks, Jules Quote Link to comment Share on other sites More sharing options...
Topdog Posted August 6, 2014 Share Posted August 6, 2014 I have a MK 2, when I next go down to it I will measure the dipstick for you. Dave Quote Link to comment Share on other sites More sharing options...
julezee001 Posted August 7, 2014 Author Share Posted August 7, 2014 Thanks Topdog, that would be great! Jules Quote Link to comment Share on other sites More sharing options...
julezee001 Posted August 19, 2014 Author Share Posted August 19, 2014 Contacted Supacat direct in the end. They were really helpful, as I have other issues with the box too. Essentially they can supply a special gauge for getting the level in the box right, but were kind enough to explain that it is a T shaped piece of metal that fits in the filler tube. It has a mark 65mm below the neck of the tube, and that's the correct level in neutral at tick over. Simple!! Needless to say the re-built box I've fitted still doesn't work as it should. Grrrr! Jules Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.