okdoky Posted March 17, 2013 Share Posted March 17, 2013 (edited) Thanks to Steve, I now have two correct tyres and wheels for the Sankey trailer ,,,,,,,,,,,,,,,, what a star !!!!!!!!!!! Had to cut the hubs off the axle and pin through the white metal brake drums so that I could fit them to my simple tube axle already fitted I believe these are the KFS set and it is obvious to see the quality of the production that is offered !!!!!!!!!!!! I am much happier with the overall look now and will get around to spraying them up when I have a few more parts for the TM ready to spray too For those who have not seen this build on other forums, here is it from the start http://www.armorama.com/modules.php?op=modload&name=SquawkBox&file=index&req=viewtopic&topic_id=165423#1389630 And here is the Landrover Lightweight I hope to be pulling it with http://www.armorama.com/modules.php?op=modload&name=SquawkBox&file=index&req=viewtopic&topic_id=171690#1441269 Thanks again Steve Nige Edited March 17, 2013 by okdoky Quote Link to comment Share on other sites More sharing options...
okdoky Posted May 16, 2016 Author Share Posted May 16, 2016 Finally got round to adding a bit more detail to the Sankey while waiting a wee bit info on the Arrows trailer !! Some tiny chains to sort out and maybe a load Quote Link to comment Share on other sites More sharing options...
robin craig Posted May 17, 2016 Share Posted May 17, 2016 The trailer of that style that I own in the 1:1 scale has a towing hitch at the rear, will yours include that detail? Quote Link to comment Share on other sites More sharing options...
okdoky Posted May 17, 2016 Author Share Posted May 17, 2016 The trailer of that style that I own in the 1:1 scale has a towing hitch at the rear, will yours include that detail? Hi Robin Yep ,,,,,,,,,,,,,,,,,, wee things still needed that I know are the catches on the rear to lock the drop down panel, hanging chains that keep it horizontal, electric connector and cables, tire pressure reminders, fix the missing link to the brakes I snapped off, maybe a single water tank load that could be swapped over to the Arrows (with a second) and then a Landrover out of my stash to tow it with ! Anything else you notice give me a pointer as I am open to any suggestions !!!! Especially obvious missing bits !!!! I have several 109's, a couple of 88's and two Lightweights to choose from after they get built that is !!!!! Thanks for looking in Nige Quote Link to comment Share on other sites More sharing options...
okdoky Posted May 18, 2016 Author Share Posted May 18, 2016 Or how about I repaint this and plonk it behind it instead ???? Or get the angle grinder out (Die-cast) and chop it up for a 110 soft top conversion ???? What ya's reckon ???? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.