Identification anyone?

I have in my possession a tool that may be an extractor of some kind, Maybe Ferret, Saladin Saracen era. I'm no good at posting pictures so I will try and describe it:-

 

Cylindrical, just over 5.5" long, with a 1/2" sq hole in the central 'web'

One end is 3.25" dia. the other 75mm dia.(Sorry to mix units, but nearer 75mm than 3")

Both ends have 6 'lugs' 5/16" wide, 3/8" long, as if they unscrew a bearing, or seal retaining ring.

The only markings are " KENT M(?)OORE Z 80 79A " The 'M' could be something else.

Just possible someone on here may be crying out for one of these, 'Wot's think'?

 

Chas.

Hi Chas,

That is a very useful tool, for a Bedford owner. It is for front and rear hub nuts ( bearing adjusters) on QL, RL, TK, MK/J.........oh and rear hubs on MW, OY, etc.

Thanks for that, Richard.

There you are chaps and chapesses, anyone needs this fine implement, let me know. I will retain ownership of it, as the owner of 'my' 439 also has 1 or 2 later Bedfords, but I am happy to lend it to those in need.

Chas.

I was crying out for one last october:-(. tried everywhere with no luck.

so I ended up having to make one.

Clive

I'm no good at posting pictures so I will try and describe it:-

 

Chas.

http://hmvf.co.uk/forumvb/showthread.php?17701-Tutorial...-Uploading-Photos-amp-other-Attachments