Jump to content

fencepost

Members
  • Posts

    24
  • Joined

  • Last visited

Reputation

10 Good

Personal Information

  • Interests
    trucks, big, green
  1. If you can't sort it PM me with a phone number.
  2. I have a spare MB block and I'm not sure what they are worth these days. It's early 45 and appears to have been dry stored most of it's life as it looks in very good condition. will need re-boring and the valve seats and guides but no sign of a crack in the usual place. Also has 3 broken studs.
  3. I have just bought a load of kit including a Lapp MP48 mount that has the spring bent, apart from that it is in very good condition. Have looked at removing the spring but it appears there is an other spring inside and you need to turn the two springs in opposite directions so I need to make a plate to stop the big spring screwing back in while undoing the small spring. any advice would be gratefully received and if you know were I can get a new spring from it will save me messing with the old one. Thanks
  4. This came off a 1945 Willys MB engine, anyone know what is should fit?
  5. Switched the cloak off now, you should be able to see them now.
  6. This came off a 1945 MB engine, anyone know what it should fit on?
  7. Anyone know what this flare shell is and are the two parts the same system or different shells? also what they are worth? thank you guys
  8. Disconnect the earth side of the battery, using a jump lead connect the battery terminal to the starter frame and try to start the engine, this will rule out earth faults. If this does not help take the other terminal off and using another jump lead short the battery terminal to the lug on the starter, this will rule out solenoid and wiring problems. Be sure to hold the clamps tight. If that does not help you could disconnect the lug from the starter and put 12volts across the starter, this will not damage the starter just for a short while but you must disconnect the starter as it may damage your other electrics. If that still does not work it's probably a starter fault, take the cover off and check all the brushes are making contact, I have known starters that have been miss handle have a brush bounce back and held off the com.
  9. Hello. Anyone no what radio this back pack is for za46606 1960. thanks
  10. I have not been to any shows etc for some years so don’tknow what to set the price at, I don’t want to put it too high or sell them fornothing. I’m hoping to have time to go to Stoneleigh this weekend and get someidea, then as and when I have time I’ll be listing everything with prices.
  11. 100ft aerial no5 nos for sale on ebay. also have other radio equipments I'm putting on ebay next month some of which are below. if you need anything just ask as I may have it (NO SETS) and you can always make an offer.
  12. I have these running boards but not sure what Dodge they are off. The left one is 40.25 inches long x 15.3/8 wide at the front and the right is 42.1/2 inches long x 14.3/4 wide. anyone know?
  13. Build card came today, my command car was made on 3rd December 1942. No problem sending cash.
×
×
  • Create New...