Jump to content

04CC22

Members
  • Posts

    1
  • Joined

  • Last visited

Reputation

10 Good
  1. We have found the problem, but not sure of the fix. The bus bar and al the pull rods were fine, including the 5th gear rod & cup. So we pulled the gar train out again and stripped it back to 5th gear. The first plate had slipped back behind the inner teeth (see picture '5th Gear plates - first plate trapped.JPG'). We have re-located it onto the teeth along with the other plates in the set, the pressure plate moves forward fine now. (see picture '5th Gear plates - first plate free with gap.JPG'). The quston is, should there be the gap behind the inner teeth so the plate can drop back? If not, now do we close this up.
×
×
  • Create New...