Jump to content

70HONEYMONSTER

Members
  • Posts

    48
  • Joined

  • Last visited

Reputation

10 Good

Personal Information

  • Location
    Midlothian
  1. Hi Richard ,See attached photos of how I lifted the back body on.Fitted like a glove without even scraping the paint.
  2. Hi Richard, Sorry my mistake. What I thought was an additional fuse box is actually the bottom of the control box. I may take take you you up on a chat over the phone when I get to nearer to completion . Just in the process of gathering all the wiring ,lights and switches together. Once again sorry for the confusion Bryan
  3. Hi Richard, I was looking at your wiring diagram and photos. In the photo that shows the dash , on the far side under the control box there seems to be an additional fuse box but this does not seem to appear on the wiring diagram? Also what are the benefits of running the ground back to the buzz bar and not grounded on the chassis or body work. Does this not mean that there will be a fair amount of earth wires arriving at the buzz bar? My wiring knowledge is not the greatest so sorry for the questions Regards Bryan
  4. Can you send me a copy of the wiring diagram that you have just now , I am at the stage of wiring and any help would be much appreciated , Regards Bryan
  5. Do new palm couplings come with the handle on the chain ? I have one handle on the chain on my Pioneer but no coupling.
  6. Can anyone give sizes of the spare wheel brackets for the Scammell Pioneer shown below? Length,width and depth and the distance the tyre should be away from the timber boards. Cheers Bryan
  7. Hi Richard, When doing my heads I put one end of the spanner over the bolt, then used a hex socket in the other end and use my torque wrench to torque the bolt through the spanner? There is a conversion for the torque rating relating to the length of the spanner, or centre of head stud to centre of Hex Socket. Can,t remember what it is . Sure it is on this Forum somewhere. Bryan
  8. Hi John, That would be much appreciated. Its the passenger side that I require. Will pm you to arrange the details and payment. Cheers , Bryan.
  9. Hi John, Were the side panels made off of templates or drawings . I only need one. Would the local firm be able to make 1 from there records or would I need to make a template?
  10. Looking Good . Did you make the side panels yourself or was it farmed out? Have only got one for mine.
  11. Thanks for that. Have you had much to do to the cab?
  12. Mezzanine in place with all the original panels storred above. Winch stored under neath in right hand corner.. With having got the Scammell home first job was to tackle the starter motor. This was removed to find a worn cog and worn contacts. A new set of contacts, and main shaft were purchased.Then it was discovered that the bush in the started was not all that good so a new one was machined up from brass and inserted into the motor housing. After sourcing a new shaft I was then informed that my starter must have come off a marine engine as the main shaft was brass and not steel.
  13. Can anyone give me the size and position of the rear windows on the back panel of the cab please?
×
×
  • Create New...