Jump to content

munga1

Members
  • Posts

    46
  • Joined

  • Last visited

Reputation

10 Good

Personal Information

  • Location
    kilmarnock, ayrshire
  • Interests
    restoration

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. munga1

    Munga

    Hi Graham. is the manual "The Munga repair Manual" I have that one but does not tell me the size of the brake fittings , But I know think they are 10x1.00 mm I bought a few from ebay that size to try them out. thanks for your reply that's whats good about these forums you can get help regards alex
  2. munga1

    Munga

    hi all i am still messing around with my munga, but can anyone tell me the thread type and size for the fittings that go into the brake master cylinder oh and of course the pipe diameter
  3. hi all i am still messing around with my munga, but can anyone tell me the thread type and size for the fittings that go into the brake master cylinder oh and of course the pipe diameter regards alex
  4. ok i will take some pics tomorrow regards alex
  5. hi all i removed the ident nut on the top of the gearbox, but no better, i looked into the side plate and some gears have damaged teeth. but not sure if thats stopping it moving. but the damaged ones do turn alex
  6. hi thanks weather permiting i will try that on sunday, tomorrow i will let you know alex
  7. hi all after a long time trying to rebuild this machine i discover the gear box wont go into first and second gear, i seem to remember it was ok before. anyway if anyone has a spare gear box, at a good price i would love to hear from you. i am rebuilding this on a shoe string. regards alex
  8. hi thanks for the answers about the clutch , but does any one know where to get a clutch pressure plate in the uk, second hand or new. I have part numbers LUX 118-00009-20 SACHS 1882-140-002 its 180mm dia thanks alex
  9. hi all after checking what seems like every picture on the net I have the answer, all I need to do now is make the bracket that bolts onto the exhaust manifold regards alex
  10. hi all does anyone have a picture or drawing of how the cable fixes to the clutch lever, and what holds the clutch cable outer sheave . I have looked at loads of You Tube videos and a workshop manual, but no where does it show the clutch cable set up. if anyone has diagrams or drawings It would help me no end regards alex
  11. hi thanks for the answer. but I went out again and discovered that one of the butterfly valves was not closing correctly. a little adjustment and it now seems to be running well, its a bit noisy tonight so I will run it more tomorrow. thanks again alex
  12. hi any suggestions out there. my two stroke engine wont run on idle, it only runs fast around 2000 rpm the carb has been set up ok I think, I had stripped the carb twice to clean it, and set it up. according to the manual. there are no air leaks on the carb, and it starts first time but runs too fast any suggestions alex
  13. hi thanks ' the blue cloud ' but I don't have a spares list or workshop manual for the munga. doing this rebuild on a shoe string and a lot of guess work regards alex
  14. hi all does anyone have a picture or drawing of how the cable fixes to the clutch lever, and what holds the clutch cable outer sheave regards alex
  15. hi for user '' the-blue-cloud '' the only group of numbers i can find where you indicated are 3038 . 20 . 571612. regards alex
×
×
  • Create New...